Armytek Parma C2 Pro
Professional mounted light with white light
Parma C2 Pro is a tactical flashlight with integrated mount for installation on a rifle or a carbine. The model is suitable both for use by special forces and for hunting.
White light with an impressive for the given dimensions brightness of 1500 lumens and beam distance of 350 meters allows to effectively perform standard tasks in low visibility conditions.
Parma C2 Pro works not only on the included battery, but also on any standard 18650 Li-Ion battery or two CR123A lithium batteries. Compatibility with batteries of various types allows to significantly increase the operating time of the flashlight in conditions of prolonged stay away from the permanent location: all one needs is to take a few spare power sources. The model is also characterized by ergonomics and ease of use. Thanks to the integrated mounting, the installation on a Picatinny/Weaver rail is performed without additional tools. Due to the small size and low profile, the installed flashlight protrudes minimally beyond the external dimensions of the weapon.
Advantages of Parma C2 Pro
Two brightness modes of constant white light for illumination and preliminary aiming using the spot of light, Strobe mode for disorienting the adversary. Quick access to Strobe mode without additional switches.
Special precisely calculated reflector for High Intensity LED modification, which provides 1.5 times the light range compared to a usual LED, and tempered glass with anti-reflective coating for maximum throw distance for the given dimensions, O-rings and bezel for additional protection of the optical system.
Convenient operation with one finger: large button for easy pressing even with tactical gloves. Switching lever for switching between constant light brightness modes and for activating the lock-out function.
Easy pressing of the buttons without additional effort doesn't hinder aiming.
Tactical mode: noiseless light switching while the button is pressed.
Quick installation on a Picatinny/Weaver rail and removal without the use of additional tools.
Multifunctional remote switch with the possibility of constant or tactical (while holding the button pressed) light switching is in the set.
Lightweight and robust body from aircraft-grade aluminium with matt non-reflective black anti-abrasive finish.
The use of two reinforced springs in the design of the flashlight for better protection of the battery and the driver. The flashlight withstands the recoil of any firearm.
The flashlight utilizes one standard 18650 Li-Ion battery (in the set) or two lithium batteries CR123A (not included).
Quick battery replacement without removing the flashlight from the weapon.
Active real-time temperature control to prevent overheating above +58 °C.
Innovative technology provides full protection against short circuit.
Total protection from water, dirt and dust in accordance with IP68 standard. When remote switch is attached, ingress protection corresponds to IP67 standard. Withstands fallings from 10 meters.
No hassle warranty 10 years.
Well-thought-out set of accessories
Multifunctional remote switch with set of mounting holders for Picatinny/Weaver rail.
Velcro mounting tape and nylon zip ties for fixing the remote switch on any part of the weapon.
Spare parts for installation of the remote switch on the flashlight.
18650 Li-Ion high capacity 3500 mAh battery.
The reflectors of Armytek flashlights have been modeled and calculated in computer software for the design of optical systems that enabled to produce a flawless light beam for a long-range distances. Flashlights with TIR optics provide smooth wide beam without distinct hotspot and sharp edges.
The completely new second-generation driver S-Tek™ enables the flashlight to emit bright and constant light even when the battery is almost discharged.
Our flashlights have a strong, difficult to break body made of aircraft-grade aluminum and developed for a minimum weight with sufficient durability. Premium type III hard anodizing 400HV.
Our flashlights have a strong, difficult to break body made of aircraft-grade aluminum and developed for a minimum weight with sufficient durability. Premium type III hard anodizing 400HV.
- Water resistance standard: IP68 (the highest). Metric profile thread provides tight parts attachment.
- An addiional O-ring increases glass sealing, and well as an extra L-ring of a specific shape.
No posts found
